S3 Alliance - Supply, Service, Solutions

6000/7000 Series High-Flow Micro-Channel Hydrogen Purifier Systems

Get Quote Request More Information

The 6000 and 7000 Series Micro-Channel Hydrogen Purifiers are designed for use as new or replacement cells for use in your existing hydrogen purification and hydrogen production equipment. Hydrogen purity levels of 99.9999999% are achievable with continuous operation.


These Micro-Channel Purifiers are available in a number of different models in order to accommodate your hydrogen gas output flow and spacing requirements. The flow rates across the 6000/7000 Series range from 60 to 400 standard liters per minute (SLPM). Please note that the physical dimensions vary, depending on output.

  

Model
  

Output (SLPM)
Length
(Inches)
Height
(Inches)
  Model 6060   60   15.6   13.7
  Model 6080   80   20.4   13.7
  Model 6100   100   20.4   13.7
  Model 6130   130   25.2   13.7
  Model 6160   160   30.0   13.7
  Model 7080   80   9.7   14.8
  Model 7145   145   14.6   14.8
  Model 7160   160   14.6   14.8
  Model 7180   180   19.5   14.8
  Model 7195   195   19.5   14.8
  Model 7210   210   19.5   14.8
  Model 7220   220   19.5   14.8
  Model 7245   245   19.5   14.8
  Model 7260   260   24.4   14.8
  Model 7280   280   24.4   14.8
  Model 7290   290   24.4   14.8
  Model 7310   310   24.4   14.8
  Model 7325   325   24.4   14.8
  Model 7340   340   29.3   14.8
  Model 7360   360   29.3.   14.8
  Model 7375   375   29.3   14.8
  Model 7390   390   29.3   14.8
  Model 7405   400   29.3   14.8

 

Specifications

  • Tubing/Cell Material:                                             316L stainless steel 
  • Helium Leak Test:                                                1E-9 cc/sec
  • Back Panel Tubing Connections:                            1/4" face seal fittings 
  • Membranes Tested to 400 PSIG
  • Finish on all UPH tubing electro-polished 
  •  Finish on all UPH cell surfaces micro-polished 
  • Ultra-Pure Hydrogen Purity:                                  99.9999999%

    (at UPH flow > 20% of max flow or > 15 SLPM, whichever is less)

  • Ultra-Pure Hydrogen Flow Rate:                            60-400 SLPM (model dependent)
  • Hydrogen Gas Feed Inlet Pressure:                       36 - 200 PSIG (model dependent)
  • Feed Hydrogen Gas Purity:                                  ~99.95%
  • Hydrogen Bleed Outlet:                                       typically 1 to 4% of feed hydrogen
  • Typical Average Power Consumption:                    <700 watts

 

Benefits

  • Highly reliable P+E inside-feed palladium cell design
  • Compact design for large UPH flows
  • Proportional, differential, integrating temperature controller
  • Accelerated Life Testing ensures reliability
  • One-year warranty